[ITMA ASIA+CITME 2018 Exhibits Preview] Four Smart Combing Debut In Jiangsu Kay Palace

"China International Textile Machinery Exhibition and ITMA Asia Exhibition" (ITMA ASIA + CITME) is made up of "China International Textile Machinery Exhibition" and "ITMA ASIA". It is the joint action of the world's most important textile machinery industry associations, such as China, European countries and Japan, in order to safeguard the interests of textile machinery manufacturers and textile industry customers all over the world, and to improve the quality of textile machinery exhibitions.

The China Textile Machinery Association, the European textile machinery manufacturers Committee and its member associations, the American Textile Machinery Association, the Japanese Textile Machinery Association, the Korean textile machinery association, the Taiwan Machinery Industry Association and other major textile machinery associations all solemnly affirmed that "the China inter national textile machinery exhibition and ITMA Asia Exhibition" is their only strong support in China.

After the successful holding of 2008, 2010, 2012, 2014 and 2016, the "China International Textile Machinery Exhibition and ITMA Asia Exhibition" in 2018 China continued to uphold the concept of providing quality service to the global textile machinery manufacturers and textile industry customers, and to create a platform for the global textile machinery manufacturers and textile professionals to interact with each other. In 2018, China International Textile Machinery Exhibition and ITMA Asia exhibition will be held on October 15, 2018 -19 at the National Convention and Exhibition Center (Shanghai).

At this exhibition, Jiangsu Kay palace displays four intelligent and differential combing equipment, including JSFA3180 stripper, JSFA2188 intelligent comber, JSFA2186 multi comber, JSFA016 intelligent cotton roll handling system (KBK).

JSFA3180 bar coiler

The volume is clear, the cotton web is uniform, the face is smooth, the sticky roll and the woolen roll appear, the weight is uneven, the CV% is less than 0.5%, the low noise and low consumption, the flexible running of the whole machine is smooth, the running power is 4kw/h, the noise is 75.5dB, and the working environment of the workshop is effectively improved. The mechanism is simple, the clamp is fixed on the box, the stability is good, the lubrication points are centralized, distributed, operated, maintained and maintained conveniently. The high efficiency drafting, the upper and lower three cylinders are pressurized, the spacing adjustment is simple and flexible, the independent winding and bar detection design is designed, and the online control is carried out all the time. The belt conveyer is adopted in the whole machine, and the maintenance is convenient and the materials are easy to be damaged. The floor area is small, the floor area is small, and the floor area is only 28.1 square meters, which is 38% lower than that of the traditional model. The design of the machine is 38% square meters. The JSFA3180 strip coiling machine is high speed and high efficiency, adopts flexible large angle wrapping winding technology, effectively improves the control function of cotton layer, and produces cotton rolls with 200m/min speed and output up to 650kg/h.

JSFA2188 intelligent comber

　　JSFA2188型智能精梳机的智能连续运行系统连续、自动、无人操作智能生产，设计筒管尾卷清理系统、棉卷头尾搭接控制系统、筒管搬运系统、翻卷系统等，并配合控制程序连续生产;锡林多角度梳理系统通过多角度梳理机构可实现90°、110°、130°锡林快速切换，设计新型钳板传动机构、吸风系统等配套机构，工艺适应性显著提高;高速高效优质，生产速度450钳次/分钟，长期连续运转，产量65kg/h，短纤维清除率≥65%，棉结清除率≥70%，满足USTER公报5%水平;传动机构优化设计，对分离罗拉、钳板、锡林等关键机构进行平衡优化设计与分析，应用锡林变速技术，高精度加工工艺，车头润滑充分，油品清澈，设备振动小、噪音低、操作维修方便、性能安全可靠。

JSFA2186 multi fiber comber

The JSFA2186 multi fiber comber has wide application scope and is suitable for combing the cotton type chemical fiber (including polyester, viscose, Tencel, etc.) and its blended, fine wool cotton, long staple cotton, cotton and linen blended material.

The new high efficiency separation and joint mechanism of the machine has high speed performance and energy saving effect. It expands greatly the adaptability of the fiber length spinning range, especially for the cotton fiber and long staple cotton with better uniformity. The combed fiber dropping rate is lower to reduce the consumption of raw materials. The new type carding equipment is applied to optimize the design of the density, shape, angle and the arrangement of the needle teeth of the cylinder and the top comb according to the parameters such as length, fineness and friction property of the cotton raw materials such as chemical fiber, cotton and hemp blended yarn, so as to reduce the filament winding of the cylinder and the top comb, reduce the fracture of the fiber and the damage of the needle, and optimize the combing process according to the type and performance of the fiber, such as the quantity of the cotton roll, the feeding mode, the length of the cotton, the distance between the cotton noil, the positioning of the cylinder, the separation of Luo Lashun spanfer timing (overlap scale), the table drafting and the drafting process. According to the different fiber types and combing quality requirements, the Xilin variable speed carding mode can be used. The special clamp cotton feeding mechanism of cotton type chemical fiber and long staple cotton can be developed to solve the problem of cotton web breakage at high speed.

JSFA016 intelligent cotton roll handling system (KBK)

JSFA016 intelligent cotton roll handling system (KBK) is used for intelligent and automatic spanportation between strip winder and comber, and develops control procedures for mechanical mechanisms such as spanport support mechanism, hanging mechanism, and embedded suspension system. The full volume storage platform is designed and completed at the output end of the stripe coiler, and the 8 rolls of the cotton roll are continuously and evenly distributed to the unit, and automatically conveyed to the comber to hoist the spanportation area. The storage platform is designed and completed, and the ATC code returned from the comber is fed to the stripe and rewinder one by one to complete the continuous production of the bar and coil and the output terminal. It can set up the supply and distribution relationship according to the different types of spinning machines and combing machines, and identify the ID intelligent handling of each device.