How To Distinguish The True And False Quality Of Leather?

According to its species, fur and fur are mainly classified as fox fur, goat fur, rabbit fur, fur and fur. Fox is divided into blue fox, silver fox and red fox. Goat is divided into adult goat and immature goat. Rabbit hair is divided into grass yellow rabbit, Rex Rabbit, white haired rabbit and so on. Mink is divided into male and female mink.

There are many kinds of leather and leather.

It is not listed here.

The leather in leather is used in many leather products, because it has good tensile strength, stain resistance, wear resistance and good air permeability.

Suede leather is not only elegant in appearance, but also good in air permeability, but it is not easy to maintain its skin. It is easy to dirty and not maintain well, especially in bad environment.

It will lodge again.

Leather has a kind of leather called modified leather, and the modified leather is processed and painted on the leather surface, and it can press different lines. Some of the finishing leather is thick, wear-resistant and breathable.

At present, the company mainly produces leather clothing such as pig skin, sheepskin, cowhide and fur leather. Leather and fur are semi natural and semi processed clothing materials. With the continuous improvement of leather making technology in China, the same skin can add a lot of different styles of leather, so it is difficult to identify the types of leather for consumers.

Here are some common ways to identify dermis.

First, the surface of leather touched by hand feels smooth if the surface of leather is smooth.

Two.

It is mainly used to identify the types of leather and the quality of leather. It is observed that there are obvious pores and patterns on the surface of the dermis, while synthetic leather is also imitating pores, but it is not clear at all.

In addition, the reverse side of synthetic leather has a layer of textile as the bottom plate. This textile floor is used to increase its tensile strength, and the reverse side of the leather is not such a layer of textile. This identification is the simplest and practical way.

Three, the smell of good quality skin generally does not have any peculiar smell, all leather has the smell of leather, if there is a pungent smell may be tanning process is not good and some chemical raw materials use excessive.

Four. The smell of igniting the dermis is almost the same as the smell after the hair is ignited. After burning, it does not knot knots and can be pinched with fingers. The artificial leather is pungent when it is ignited, and the type and quality of the pimple skin after burning are identified.

Here is only the usual leather:

First, pigskin 1, pig smooth noodles, ordinary pig smooth noodles are processed on the surface of pig skin after different leather making processes. First, they are coated with pulp on the surface of the pig and then are coloured. The smooth surfaces of the ordinary pigs are glossy, and the pores are arranged in a regular way. The three pores are triangular in shape. According to the different regions and the different tanning techniques, the pig smooth noodles are different in quality.

Because of the continuous improvement of leather technology, pig smooth noodles can be processed into many different kinds of skins.

Effect, embossing effect is on the surface of the skin pressure strip, blood stripe, and so on, the effect of the lychee grain, this effect is sometimes a bit like the coarse grain effect, but it is essentially different from the cowhide.

The characteristics of the litchi pattern are that the skin is thicker and the grain is rough.

The effect of light coating is that the surface of this kind of leather is not directly coated with different colors, but its gloss is slightly darker than ordinary gloss. This leather handle is better than ordinary smooth surface, and the leather handle has drooping feeling on the hands.

The effect of water washing is also very thin. The difference between the glossy coating and ordinary smooth surface is not very big. The difference is lighter than ordinary smooth.

You can wash the stains on clothes directly.

The color of the skin and the bottom plate is different. After making the finished product, you can wipe the clothes on the outside of your garment with sandpaper or other raw materials, and turn your clothes into a more fashionable style.

2, the pig head layer suede leather ordinary head layer suede leather is processed on the reverse side of the leather head.

The surface of suede is short and thin with a layer of mercerizing with a strong sense of direction.

Sometimes you can see less pores.

This kind of leather is better and more elastic than ordinary suede leather, and is more vertical than ordinary suede leather.

The leather is modified with leather or leather.

It can be used for printing, coating and oil film.

Printing is usually done on the side of the suede leather and processed into different patterns. The film is made of a layer of film on the velvet side of the suede leather. It has a layer of bright light. It is a more fashionable leather, but its drawback is its poor air permeability (which is best not to be explained to consumers).

The oil film leather is a raw material mixed with three kinds of oil on the velvet side.

It can be processed into an oil film leather that resemble the old effect. When folding or crumple is encountered, it will be normal for some of the color folding to appear.

3, two layers of suede leather pig skin two layers of suede leather and the first layer of suede leather is essentially different, its suede is slightly thicker than the first layer of suede, and can see the triangular pores on the pig skin.

The softness and tensile strength are far less than that of the first layer suede leather, and the opening of the skin is much smaller than that of the first layer.

Two layers of suede leather can also be processed into many different kinds of modified leather as the first layer of suede leather. The price of the two layers of suede is much lower than that of the first layer of suede leather.

So we seldom use this kind of leather in domestic sales.

Two, sheepskin

1, sheepskin sheepskin is characterized by thin leather plate, soft, smooth and delicate handle, small pores, irregular uniform, flat circular.

Sheepskin is a leather raw material in leather clothing.

Now the sheep skin has broken the traditional style and processed into many different styles such as embossing, washable, printing and so on.

2, the structure of goat skin and goat skin is slightly stronger than that of sheep skin, so the tensile strength is better than that of sheep skin. Because the skin layer is more thick than sheep skin, it is more wearable than sheep skin.

The difference between the sheep skin and the sheep skin is that the skin layer of the goat skin is relatively rough, and the smoothness is not as good as the sheep skin, and the feeling of the hand is a little worse than the sheep skin.

The goat skin can be made into many different styles of leather. It can be washed with imitation leather. This kind of leather is not coated and can be directly washed into the water. It does not decolorization and the shrinkage rate is very small.

This kind of leather is rolled on the surface of the skin with a layer of oil wax. When the skin is folded or crumpled, it will appear that some of the colors are shallower.

Three, cowhide

Because the cowhide can reach a certain thickness and fastness, it is mainly used for leather and leather shoes.

The characteristics of the cowhide are small pores, evenly distributed, full leather surface, stronger leather than other skins, firm and elastic handle.

There are also more varieties of leather garment leather. At present, the leather made of cowhide is different from that of pigskin and sheepskin.

The two layer of calf is also used for clothing, but it is usually two layers of suede on clothing. The difference between it and the two layer of pig is that the suede fiber is coarser, but it has no pores.

The two layer leather modified by cattle is mainly used for leather products. It is processed on the two layers of cattle to imitate smooth or imitation effect. This kind of leather is difficult to identify.

Four, fur fur clothing can be divided into two categories from its uses:

One is clothing for Mao's clothing, which is aimed at protecting the cold. The other is the outer garment of Mao Dynasty, which is mainly used for decoration.

1, the fur of fox fox fur is characterized by long hair, usually 7-9CM, uneven hair length and glossy hair than other foxes.

It is grey and black.

The blue fox has fine hair and glossy face. It is shorter than silver fox hair. It usually has 5-6CM. The natural color of blue fox is white. It is usually used for dyeing clothes.

The characteristics of red fox hair are similar to those of the blue fox, but slightly longer than the red fox. The whole color is red and gray, and is not dyed for clothing.

2, goat fur and goats fur is thin and not easy to lose hair. The needle is thick and the direction is not complete. The goat leather is full of leather side. It can be made into suede, flower spray, printing and rolling patterns with different effects.

Goat leather can be dyed into different colors.

3, rabbit hair, fur, white rabbit, white rabbit, less leather, and all kinds of colors needed.

Grass yellow rabbit grass, yellow rabbit hair needle is slightly longer, and its natural color is usually used on clothing.

The rex rabbit is soft and fine, smooth and delicate. It is not easy to shed hair than other rabbit hair. The rex rabbit fur is the best one in rabbit hair.

Mink fur and fur have better gloss than other kinds of leather. They are especially slippery with hand touch, and it is not easy to lose their hair.